Wear Resistant Steel

We bring froth an impregnable range of Wear Resistant Steel-Xar 500.

Scope

This material specification applies to 3mm to 100mm thick plates of the wear resistant special structural steel XAR®500.

Application:

• The steel may be used at the discretion of the purchaser for wear-exposed structures, e.g. excavating, mining and earth-moving machinery, truck dump bodies, conveying, crushing and pulverizing equipment, scrap presses and paving molds. The processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel. The processor/fabricator must assure himself, that his design and work methods are appropriate for the material, are state-of-the-art and are suitable for the envisaged purpose. The selection of the material is left up to the purchaser. Chemical Composition (heat analysis, %)

The steel has a fine-grained microstructure. Nitrogen is absorbed to form nitrides by means of Al and, where applicable, Ti. The steel may contain up to 1.5 % Ni. Delivery Condition: Quenched or quenched and tempered (see ‘Heat Treatment’). Hardness at Room Temperature: In the delivery condition: 450-530 HB. The Brinell hardness shall be determined in accordance with ISO 6506.

Our company is highly acclaimed in offering a wide range of Heavy Wear Resistant Steel-S 690. The typical applications of this product include Heavy road vehicles: chassis, dumper bodies. Crane_s construction: booms of mobile crane_s. Structural steel works: bridge components, components for offshore structures. Pressure vessels: fixed and transportable storage tanks, vessels. Power plants: penstocks, spiral cases. Mining equipment: roof supports etc.

Works Designation

• MAXIL 690 Q / MAXIL 690 QL / MAXIL 690 QL1
• DIN EN S 690 Q / S 690 QL / S690 QL1
• Condition of Delivery
• Water quenched and tempered.

We bring froth an impregnable range of Wear Resistant Steel-RAEX 400. RAEX AR 400 is a wear-resistant steel grade. The number designation indicates the average Brinell hardness value: 400 HBW. Despite its strength and hardness, weldability and formability of this grade is good.

Applications:

• Ladles and lip plates of earth-moving machines, wearing parts of mining machines, concrete mixing plants and wood processing machines, platform structures, feeders and funnels.

Our company is highly acclaimed in offering a wide range of Wear Resistant Steel-Xar 600.

Scope

This material specification applies to 4mm – 40mm thick plates of wear-resistant special structural steel XAR 600. The extraordinary high resistance to abrasion of XAR 600 results from a special water quenching process.

Application:

• The steel may be used at the discretion of the purchaser for wear-exposed structures, e.g. excavating, mining and earth-moving machinery, truck dump bodies, conveying, crushing and pulverising equipment and scrap presses. The processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel. The processor/fabricator must assure himself, that his design and work methods are appropriate for the material, are state-of-the-art and are suitable for the envisaged purpose. The selection of the material is left up to the purchaser.

Our company is highly acclaimed in offering a wide range of Wear Resistant Steel-Rexar 400. This RAEX AR 400 is a wear-resistant steel grade.  The number designation indicates the average Brinell hardness value: 400 HBW.  Despite its strength and hardness, weldability and formability of this grade is good.

Applications:

• Ladles and lip plates of earth-moving machines, wearing parts of mining machines, concrete mixing plants and wood processing machines, platform structures, feeders and funnels.

An Abrasion Resistant Steel Plate is used to define a steel product specifically designed to create finer resistance to crushing and high –speed impact from rough, sharp and barbed materials.

What is ABRASION RESISTANT 500 Steel Plate ?

Conquest Steel and Alloys continually works on upgrading its production process to offer unbeatable and exquisite products. Our constant search for innovation and quality has led to us producing Abrasion Resistant 500 Steel Plates, which repel wear too.

We have been a key supplier of AR 500 Steel Plates, known to be a great fit in challenging industries, with tedious tasks related to significant wear.

What we offer :

ABRASION RESISTANT 500 STEEL PLATES

Our AR 500 Steel plates are
•  Weldable
•  Real cold bending features
•  Grain – refined
•  High – impact properties
•  Hardened and toughened for durability

Conquest steel & alloys is the highly acclaimed industry that is involved in manufacturing and supplying the commendable quality of ROCKSTAR 400 PLATES. We as the client-focused industry are offering these plates at various standards, widths, lengths, heat treatment, surface finishes, and specifications. Giving priority tom the special application demands, it is also made available at cut-made specifications. Our product is confirming various product quality standards. ROCKSTAR 400 PLATES as the abrasive resistant weldable steel plates are having a very good combination of properties like formability, toughness, abrasion-resistant, and flatness. This is to easily meet the diverse application requirements and fabrication demands. Rockstar 400 is supplied to the clients in the tempered and in quenched conditions. The specially designed displeasure cycle is providing the formability with less effect on hardiness.

Rockstar 400 is ideal choice for yellow goods applications into the mining. Also Rockstar 400 is ideal solution for the applications like TRAILER TIPPER BODY LINERS

Conquest Steel and Alloys is a mega stockholder of an extensive range of first – in – class wear resistant and abrasion resistant Steel plates. We are suppliers of AR (ABRASION RESISTANT) 450, the Steel plate having supremacy regarding brute strength, resistance to any contusions and can withstand the ravages of time.

What is ABRASION RESISTANT 450 Steel Plate ?

ABRASION RESISTANT Steel is a wear and tear Steel. Our AR 450 Steel plates are extremely tight, manufactured in style to sustain substantial rigour. A unique combination of strength and durability, we offer you our AR 450 Steel plates, commonly known as ABREX 450 and SWEBOR 450, specially designed as per your industry demands.

AR 450 also known as Abrasion Resistant 450, ABREX 450 and XAR 450, comes in different grades; its size is adjustable to a customised dimension, making it extremely useful.

What we offer :

ABRASION RESISTANT 450 STEEL PLATES

We offer the most superior quality, leading – edge wear resistant AR 450 Steel plate, with variants like SUMIHARD 450, ROCKSTAR 450 and RAEX 450. We offer the most superior quality, leading – edge wear resistant AR 450 Steel plate, with variants like SUMIHARD 450, ROCKSTAR 450 and RAEX 450.

Salient Characteristics of our ABRASION RESISTANT 450 Wear Plates :

1. Extended wear life

We bring froth an impregnable range of Wear Resistant Steel-Xar 400.

Scope :

This material specification applies to 3mm to 100mm thick plates of wear resistant special structural steel XAR®400.

Application:

• The steel may be used at the discretion of the purchaser for wear-exposed structures, e.g. excavating, mining and earth-moving machinery, truck dump bodies, conveying, crushing and pulverizing equipment, scrap presses and paving molds. The processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel. The processor/fabricator must assure himself, that his design and work methods are appropriate for the material, are state-of-the-art and are suitable for the envisaged purpose. The selection of the material is left up to the purchaser.

Our company is highly acclaimed in offering a wide range of Wear Resistant Steel-Fora 400. This FORA 400, Hardox^® 400 is a water quenched martensitic steel, with a typical hardness of 400HB (42.5 HRC), constituting a real answer to abrasive wear. Thanks to its toughness, its elevated hardness, its high yield strength, FORA 400 can be used wherever resistance to wear by sliding or by moderate impacts is required. Compared to conventional steels, such as S355, 

Features:

1. FORA 400 offers a real benefit to equipment life times
2. Allows a significant thickness reduction in designs since its wear resistance is up to 3 times longer than S355 grade. 
3. FORA 400 is very easily welded
4. Has good forming properties thereby contributing to ease of fabrication.

We bring froth an impregnable range of Wear Resistant Plate. This superior make wear resistant steel is highly demanded in the international markets for their optimum quality, durability and matchless reliability. These finest grade quality wear resistant steel can be customized in accordance with the client's requirements. We offer this wear resistant steel at market leading price range.

We bring froth an impregnable range of Wear Resistant Steel-RAEX 700 MC. RAEX 700 MC Optim offers both strength and formability at the same time. The surface quality, dimensional and geometrical accuracy and uniformity of properties of this steel are all top class. Steel structures can be made lighter, which means that the payload of machines and equipment can be increased and fuel consumption reduced. The letter ‘M’ indicates the thermo mechanical rolling of these steel grades, which is their delivery condition. The letter ‘C’ means that the steel is suitable for cold forming in compliance with EN 10149-1.

Applications:

• Frame structures of mobile vehicles, surface structures of commercial vehicles, frames and booms of forestry vehicles, crane arms and other lifting equipment, load handling equipment and masts.