High Tensile Plates
High Tensile Plates
DIN-Code | Material no. | Certificate | Plate thickness in mm | Width in mm | Length in mm | |
S 690 QL | 1.8928 | 3.1B acc. to EN 10204 | 03/01/00 | 1000 - 3000 | up to | 15000 |
Maxil 690 (Salzgitter), Naxtra 70 (ThyssenKrupp Stahl), Dillimax 690T (Dillinger Hütte), Supralsim 690 (FaFer), Weldox® 700E (SSAB) | ||||||
S 890 QL | 1.8983 | 3.1B acc. to EN 10204 | 4 - 120 | 1000 - 3000 | up to | 16000 |
Maxil 890 (Salzgitter), Xabo 890 (ThyssenKrupp Stahl), Dillimax 890T (Dillinger Hütte), Supralsim 890 (FaFer), Weldox® 900E (SSAB) | ||||||
S 960 QL | 1.8933 | 3.1B acc. to EN 10204 | 4 - 100 | 1000 - 3000 | up to | 12000 |
Maxil 960 (Salzgitter), Xabo 960 (ThyssenKrupp Stahl), Dillimax 965T (Dillinger Hütte), Superelso 960 Q (FaFer), Weldox® 960E (SSAB) |
Strenx 700 S690ql Weldox En 10025 High Tensile Steel Plates
Material Grade | STRENX 700 |
Brand | SSAB |
Surface Treatment | quenched and tempered |
Size (feet X feet) | ANY |
Ask for Price
weldox® 700 Plate is general structural steel with minimum yield strength of 700 MPa. It meets requirements for the corresponding steel grades and quality according to EN 10025 standards. Highly durable in nature, all these plates are mainly used at construction sites for supporting concrete when making beams, walls, culverts, docks in buildings and flyovers.Features
- Yielding strength : minimum 100,000
- Guaranteed impact properties at 20 FT./Lbs. at 40???F, Typical values up to 100 FT/Lbs
- Excellent Cold Bending properties and very good weldability
- Certifiable to Lloyds Register of shipping
- Quenched and tempered
- Grain-Refined
- Brinell hardness of 260-280 Bhn
Chemical Properties
C | Si | Mn | P | B | NB | Cr | V | Cu | S | Ti | Ai | Md | Ni | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.20 max | .60 max | 1.60 max | .02 max | .005 max | .04 max | .70 max | .09 max | .30 max | .010 max | .04 max | .015 min | .70 max | 2.0 max | .015 max |
Mechanical Properties
Yield Strength KSI Min | 100 |
Tensile Strength KSI Min. | 110-130 |
Material Size Availability
Thickness | Plate Size |
---|---|
3/16" | 96" X 240" |
1/4"-3" | 96" X 288" |
Strenx ™ 700 wear resistant steel plates STOCK CHAMPAK INDUSTRIES
Strenx™ 700 MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 700 MPa for stronger and lighter structures.
Strenx 700 MC meets or surpasses the necessities of S700MC in EN 10149-2. Average applications incorporate an extensive variety of segments and parts in requesting load-bearing structures.
Strenx 700 MC comes in loops, opening curls or slice to-length sheets.
Strenx 700 is a high quality basic steel (700 MPa) with exceptional durability for a few of burden conveying structures and different applications. Driving elements are uniform properties, simple to weld and conceivable to curve genuine tight.
CHEMICAL COMPOSITION
Grade | C max | Si max | Mn max | P max | S max | Al max | Nb max | V max | Ti max |
---|---|---|---|---|---|---|---|---|---|
Strenx 700 | 0.12 | 0.21 | 2.10 | 0.020 | 0.010 | 0.015 | 0.09 | 0.20 | 0.15 |
MECHANICAL PROPERTIES
Thickness Mm | Yield strength Rp 0.2, min MPa | Tensile Strength Rm MPa | Elongation A5 min % | Min. inner bending radius for a 90° bend3) |
---|---|---|---|---|
2 - 3 | 700 | 750 - 950 | 10 | 0.8 x t |
3.01 - 6 | 700 | 750 - 950 | 1.2 x t | |
6.01 - 10 | 700 | 750 - 950 | 1.6 x t |
PROPERTIES
Environmental friendly
Technical support
Less weight
Better fuel economy
Increased payload
Stay within legal limits for on-road transportation
Lighter products
Additional Information:
- Pay Mode Terms: Other